Your Ring Doorbell could be flashing blue light for several reasons – a weak battery or a lost Wi-Fi connection. Ring Doorbells come equipped with a doorbell and a camera on the front, as well as a circular light. This light may provide a great deal of information about the internal workings of your Ring Doorbell.
Of course, it isn’t easy to figure out what the blinking or flashing of this light means. It is especially complicated to understand when you’re new to this sort of technology. To assist, we’ve explained the ring doorbell blinking blue light issue.
If your Ring Doorbell begins to flash spinning blue light at one-second intervals after the setup is done, it means your Ring Doorbell is restarting. It usually occurs when your doorbell goes offline due to a power cut or gets an automated firmware upgrade.
Why is Ring Doorbell Flashing Blue Light
The reason why your Ring Doorbell shows a spinning blue light is easy to understand. And trust us, the solution to fix the blinking light is even easier to execute.
If your Ring doorbell is flashing blue light, try activating an alarm and check your internet connection. Contact Ring support if your Ring Doorbell continues to flash a blue light.
Still have questions about the blinking blue lights and how to tell them apart from other lights patterns on your Ring Doorbell? Keep reading to find out more about the different blue light patterns that may flash on your Ring Doorbell and what they represent.
How To Decode Ring Flashing Blue Light Patterns
The blue LED on your Ring Doorbell can alert you about the status of the device. It may flash in distinct blue and white colors, and each pattern can convey a specific message.
It is important to recognize the different signals that your Ring Doorbell may communicate via its light to make sure that your device runs smoothly.
Check out the table below to understand the message behind each of the blue LED patterns on Ring Doorbell. The table will help you decode why the Ring Doorbell is flashing blue.
|Ring Blue Light Patterns||What Do They Mean|
|Blue light goes on and off in one-second-long flashes||Ring Doorbell is restarting or rebooting.|
|Blue light blinks and proceeds upward||Ring Doorbell is attempting to connect to a Wi-Fi network during setup.|
|Four blue lights flash four times, succeeded by a white circular light||Ring Doorbell setup is finished and it’s ready to use.|
|The upper half of the blue ring light flashes||The Wi-Fi password entered during the setup in the Ring app is incorrect. For the Ring Doorbell Pro, it may mean that the non-removable battery has completed the first cycle of full charging.|
|Faster blue light flashes succeeded by a spinning white circular light||The factory reset process is complete.|
|Spinning blue light||It indicates that the doorbell button was pressed.|
|Solid non-blinking blue light||The two-way audio is active.|
Types of Flashing Blue Lights
After going through the table above, you must be wondering whether the explanation fits every Ring Doorbell. Let us explain it better by rounding up each blue light message.
Flashing During Setup
Typically, when the Ring Doorbell is configuring, the light will spin rather than flash. To indicate that your doorbell is attempting to connect to your home Wi-Fi network, the LED light changes to a flashing blue pattern that moves upwards.
If you enter the incorrect password on the Ring app during setup, the upper half of the blue light will blink, indicating that you must re-enter the password to finish the setup.
When the setup completes, the light will blink blue four times before displaying a white circle to indicate that it is available for use.
Make sure your doorbell has a consistent and robust Wi-Fi connection. Or else, you may experience a delay in its functionality.
Flashing At Random Times
If your Ring Doorbell is blinking blue at regular one-second intervals after the completion of setup. It implies your doorbell is in reboot mode. It occurs when your doorbell shuts down due to a power cut or receives an automated firmware upgrade.
When the Ring Doorbell continues to flash, all you have to do is wait for it to restart. This process might take a couple of minutes.
Ring Doorbells are known to reboot sometimes. Nevertheless, if this happens regularly, it might be a concern. To avoid this, you have to ensure charging your Ring Doorbell battery frequently.
If you have a wired doorbell, ensure that the cables are fully intact and firmly attached.
Ring Doorbell Flashing Blue While Charging
If your Ring Doorbell is flashing Blue when charging, the blue light pattern can be interpreted according to different models. If you own a first or second-generation Ring Doorbell you can charge it by putting the charging cord straight into the port at the rear.
The blinking LED shows that the doorbell is charging at the moment. The circular light shows that the battery life has extended. The indicator turns solid blue when the battery is fully charged. Some of the battery-powered variants of Ring Doorbell feature detachable batteries charged externally.
When you remove doorbell batteries, the lights turn off and only turn on when batteries are restored or replaced. Although the Ring Doorbell Pro is a corded device, it still requires several hours of charging after the initial setup.
During setup, the charging begins automatically, with the upper half of the LED flashing blue. The light turns off when the charging finishes.
Even if your doorbell has just finished charging, the Ring app may report that it is short on charge. In such a scenario, give the doorbell a few trial rings to show the accurate battery level on the app. It usually happens due to a lag in the app’s battery assessment that only updates when you push and ring the doorbell button.
Flashing Blue And White Light
If your Ring Doorbell is flashing blue and white, it indicates that the doorbell is going through a hard reset or factory reset. It happens when you initiate a factory reset from your smartphone.
However, if you continue to see this same blue and white light sequence by doing nothing, the Doorbell may have been jammed in a perpetual reset cycle.
If your Ring Doorbell is caught in a reset loop, then you should contact Ring support.
When you initially turn on the doorbell, you will witness another blue and white sequence, but this time with four individual LEDs. This means that the configuration method you followed was successful; nevertheless, it may take over an hour for the system to fully charge.
Spinning White Light
If there are no saved login credentials in the Doorbell, the spinning white light appears whenever the device attempts to establish a Wi-Fi connection.
There is nothing to worry about this status light as it goes off after 10 minutes of failing to connect to the Wi-Fi. It is pretty easy to fix this issue and successfully set up a Wi-Fi connection. Check out this article to set up Wi-Fi on your Ring Doorbell.
How to Fix a Ring Doorbell Flashing Blue Light Issue
The blinking blue light on your Ring Doorbell indicates that it is charging. Once the battery is fully charged, it should switch off automatically after about 3 or 4 hours. If it continues to flash for an extended period, below are some troubleshooting methods to attempt.
There could be a software glitch forcing the doorbell to flash incessantly. To resolve this issue, try activating an alert using the doorbell button or the Ring app on your phone.
You may also try rebooting the doorbell, resetting it to default factory settings, or activating other features on the device.
Check Internet Connection
Sometimes your Ring Doorbell may fail to detect if the battery is fully charged due to a faulty internet connection. You can fix this issue by checking your internet connection and ensuring that your doorbell is connected.
Get In Touch With Ring Support
If neither of the solutions works, it might be a tell-tale sign of an internal problem with the doorbell, such as a faulty battery, circuitry, or the LED light altogether.
In this scenario, your best bet is to contact Ring customer service for help. They will walk you through several invasive techniques to diagnose the issue and find a fix without revoking your warranty.
The blinking of the LED on your Ring Doorbell may indicate a myriad of things. It’s critical to learn what each light pattern means so you can critically analyze your device’s condition. Consider bookmarking this article for future reference. That way, you’ll be able to refer to it whenever your Ring Doorbell encounters any issue relating to the blinking of blue or white light.
A continual, flashing blue light is not a reason for concern and can usually be resolved by trying different methods. For us, the go-to methods include rebooting the device or making sure that its battery is fully charged.
We hope our guide helps in understanding why is Ring Doorbell flashing blue light. Let us know in the comments!